FritzBox 7360/7490/3490/7430 Full Vectoring approved

Si vous avez un problème ou une solution à un problème ou une astuce avec ce type de modem, postez donc l'info ici

Modérateur: Barbapapa

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 27 Nov 2020 10:43

kalima a écrit :Edit : la 07.24-84071 est sur le site maintenant.
07.24-84070 pour 7490, 07.24-84071 pour 7590 :wink:
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par carabao » 28 Nov 2020 08:56

Pour ceux que cela intéresse, j'ai activé le pilote par défaut depuis plus de 2 jours sans soucis. Ma vitesse de synchro est toujours de 100/30.
Fritz!Box 7530ax int, FW 07.57 - VDSLB2pv6L046k.d28a ~ Annexe B ~ ligne vectorisée ~ sync 100/30 (zone 1)
Sauvegarde du manuel, FW et recovery FW du modem Fritz 7490, WLAN 1750e, Fritz 7530ax, WLAN 1200ax: https://drive.google.com/drive/folders/ ... drive_link

Historique
VDSL .........>2019: edpnet (profil de base: 100 - 30) + VOIP OVH - 2017: edpnet (profil de base: 70 - 30) + VOIP OVH
ADSL2+ ....>2012: belcenter (15 - 0,740) + raw copper - 2009: belcenter (15 - 0,740)
ADSL..........>2008: belcenter (6 - 0,640) - 2005: mobistar (4,1 - 0,386) - 2004: scarlet (3,3 - 0,128) - 2003: tiscali (3,3 - 0,128) - 2001: wanadoo (3,3 - 0,128)
V90............>2000: infonie (forfait) - 1999: Uunet
-----------------------------------------------------
Site dédié à la caravane & au camping: http://www.caravane-camping.be
Avatar de l’utilisateur
carabao
Acharné
Acharné
 
Message(s) : 1178
Inscription : 07 Déc 2001 01:00
Localisation : Europe, Wallonie

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 02 Déc 2020 21:01

Nouveau firmware LAB=BETA pour la FRITZ!Box 7490 :

Version: 07.24-84158 - Date: 30 novembre 2020
Pilotes DSL : identiques depuis la version 07.19-78988, à savoir :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:

  • Internet:
    • Fixed - In factory settings the first VPN connection could not be enabled for a single instance
  • Telephony:
    • Improved - After all new received fax documents in the fax journal have been viewed, the Info LED stops flashing
    • Fixed - Telekom SIP trunking account could not be disabled
    • Improved - Optimized details in the new fax journal
    • Improved - More tolerant error handling for CardDAV servers that use Cloudflare (including Tellows)
    • Fixed - In the settings of the internal fax machine it was not possible to switch from "Send Faxes Only" to "Send and Receive Faxes"
    • Improved - Deletion of fax documents from the fax journal optimized
    • Fixed - Incorrect error message when wrong account data used for CardDAV-based telephone books
    • Fixed - No Registration of telephone numbers on a Mesh Repeater behind a FRITZ!Box 6890 operating as a Mesh Master
  • Smart Home:
    • Fixed - Unreliable countdown switching with FRITZ!DECT 200 and FRITZ!DECT 210
Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 14 Déc 2020 21:22

Nouveau firmware LAB=BETA pour la FRITZ!Box 7490 :

Version: 07.24-84706 - Date: 14 décembre 2020
Pilotes DSL : identiques depuis la version 07.19-78988, à savoir :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:
Code : Tout sélectionner
Internet:
•   Fixed Expanded failover protection with mobile dongles in modem mode when using a non-functioning ADSL line
•   Fixed Expanded failover protection with mobile dongles and internet access via WAN/LAN 1 was not started under certain initial conditions present at the time of activation

Home Network:
•   Improved Faster display of network connections in very large networks
•   Improved When leaving the device details a message concerning changed device names is displayed only if the name was actually changed
•   Change When an individual name is set for the FRITZ!Box, the name of the working group for home network sharing ("USB/Storage") remains unchanged

USB:
•   Improved In fritz.nas, multiple files can be selected using the shift key
•   Fixed SMB sharing settings (fritz.box) were not displayed in the Windows network environment

System:
•   Change The option to log in to a FRITZ!Box (user interface) without a password, which was not recommended, is no longer supported. The home network login mode without a password, which is not recommended, is no longer supported. For the initial access to the user interface after the FRITZ!OS update, the user needs to assign a FRITZ!Box password (additional confirmation required)
•   Change If "only with the FRITZ!Box password" was set up for logging in to the user interface, a FRITZ!Box user with the name "fritz" and a random four-digit number together with the FRITZ!Box password will be created automatically. To log in to the user interface in the home network, entering the FRITZ!Box password is still sufficient. Automatic generation of a user according to the naming structure fritz and a random four-digit number if login before the update took place only with the FRITZ!Box password. Important information for developers of apps that would like to register with FRITZ!Box can be found at https://avm.de/fileadmin/user_upload/Global/Service/Schnittstellen/AVM_Technical_Note_-_Session_ID_deutsch_Dez2020.pdf

Internet:
•   Fixed Content of columns for "Online Time Today" and "Internet Use" were sometimes reversed

Wireless:
•   Improved Better stability
•   Fixed Problems with the processing of multicast packets resolved, e.g. for IPTV applications between Wi-Fi devices
•   Fixed Various problems when changing channels with the setting "Set Wi-Fi channel settings automatically (recommended)" now fixed

Telephony:
•   Improved Optimized details for telephone book and call diversions
•   Fixed After multiple selections in the telephone book, several actions were performed incorrectly or incompletely

USB:
•   Improved Stability
•   Fixed Links for sharing NAS contents incorrectly required FRITZ!Box login data

Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 21 Déc 2020 15:13

Nouveau firmware LAB=BETA pour la FRITZ!Box 7490 :

Version: 07.24-84944 - Date: 18 décembre 2020
Pilotes DSL : identiques depuis la version 07.19-78988, à savoir :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:
Code : Tout sélectionner
Internet:
•   Fixed The error message when an IPv4 address for a home network device was assigned twice was invisible

Wireless:
•   Improved Better stability

Home Networt:
•   Fixed Rendering of the icon for a prioritized device was not always correctly assigned

System:
•   Improved Reworked error handling when the “Access from the internet allowed” option was enabled and an invalid password was entered
•   Fixed When MyFRITZ!App or the FRITZ!App Smart Home were configured for the first time, they could not be used while on the move or a message appeared stating that the login data were invalid

Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 12 Jan 2021 18:38

Nouveau firmware LAB=BETA pour la FRITZ!Box 7490 :

Version: 07.24-85134 - Date: 8 janvier 2021
Pilotes DSL : identiques depuis la version 07.19-78988, à savoir :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:
Code : Tout sélectionner
Internet:
•   Fixed The “Only surfing and mail allowed” setting had no function for the Wi-Fi guest access

USB:
•   Fixed FRITZ!NAS sharing links required entry of login data

System:
•   Fixed The “Support” page could no longer be opened directly

Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 19 Jan 2021 20:13

Nouveau firmware LAB=BETA pour la FRITZ!Box 7490 :

Version: 07.24-85337 - Date: 18 janvier 2021
Pilotes DSL : identiques depuis la version 07.19-78988, à savoir :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:
Code : Tout sélectionner
Internet:
    Fixed Addition of a network application to “Internet / Filters” was rejected with error code 1
Wireless:
    Improved Better stability
    Fixed Erroneous texts on the Wi-Fi info sheet
Telephony:
    Improved Enhanced stability in the context of encrypted telephony
    NEW Support for “Telekom CompanyFlex SIP-Trunk”
System:
    Improved Improvements to details under “Diagnostics / Function”
    Fixed When push services were enabled for the fax function, an error message was shown for no reason

Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 23 Jan 2021 19:02

Nouveau firmware Labor=BETA pour la FRITZ!Box 7490 :

Version: 07.24-85520 - Date: 22 janvier 2021
Pilotes DSL :
- Défaut : 1.100.136.43 (OK car défaut du firmware 07.21, en cours de tests pour agréation par Proximus)
- Précédent : 1.100.136.39 (OK car défaut du firmware 07.12, agréé par Proximus)

Changelog pour cette version:
Code : Tout sélectionner
Internet:
    Fixed - Online Monitor for mobile communications did not always show data when “Advanced Failover Protection” was enabled
    Fixed - Prioritization was incorrectly offered in the details of guest devices, although the function is not available in the guest network
    Fixed - The unsupported function “Disable NAT” was offered
    Fixed - During configuration of port sharing, a message incorrectly notified that the port was already assigned
Wireless:
    Improved - Stability increased
    Fixed - In the table of known wireless devices, the display of long names was incomplete in the tooltip function (mouseover)
    Fixed - After WPS was concluded for the guest access, the “Wi-Fi / Security / WPS Quick Connection” page was not displayed
    Fixed - When parallel WPS registrations were detected they were not ended reliably
    Fixed - Problems with enabling the radio network not used for the uplink in repeater mode (including Wi-Fi guest access)
Telephony:
    Fixed - Email configuration for a registered FRITZ!Fon was not possible (under “Telephony / Telephony Devices”)
    Fixed - The detailed information on voice transmission showed the use of encrypted telephony only for the first telephone number of a SIP trunk (CompanyFlex)
USB:
    Fixed - Data transmission via network drive function (SMB) failed with the Windows error message “STATUS_NO_MEMORY”
System:
    Fixed - Number of messages in “System / Event Log” was too smal in some areas
    Improved - Better stability in the update process

Liste complète des mises à jour et améliorations : https://en.avm.de/fritz-lab/fresh-from- ... rovements/
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par kalima » 27 Jan 2021 11:46

On s'approche de la finale 7.24 car ils parlent de la 7.25 dans les know issues.

"With the upcoming release of FRITZ!OS 7.25, there will be a change when logging in with the FRITZ!Box password, which app developers will need to take into account"
Proximus Internet Maxi (VDSL2 : 100mbps/30mbps@166m) // Fritz!Box 7590-7.55 (DSL Driver Native) // 2XAsus RT-AX86U(1xMain/1XAiMesh) Asus-Merlin388.2.2 // Shield 2019Pro + Kodi V21 Alpha for DV
kalima
Membre
Membre
 
Message(s) : 105
Inscription : 04 Oct 2019 11:44

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par csam » 27 Jan 2021 13:24

Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.

__
CS
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par mackguil » 27 Jan 2021 15:04

csam a écrit :Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.

__
CS


Ce n'est pas la 7.13, l'actuelle ?

FRITZ!OS : 07.13 - Version actuelle
Avatar de l’utilisateur
mackguil
Vingt mille
Vingt mille
 
Message(s) : 21326
Inscription : 14 Mai 2005 10:22
Localisation : Luik Belgium

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par csam » 27 Jan 2021 16:11

mackguil a écrit :
csam a écrit :Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.

__
CS


Ce n'est pas la 7.13, l'actuelle ?

FRITZ!OS : 07.13 - Version actuelle
Oui, 7.13, sorry

__
CS
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par globox3 » 27 Jan 2021 16:50

csam a écrit :Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.

__
CS

https://en.avm.de/fileadmin/user_upload ... -85567.zip
Fidèle au même opérateur (Wanadoo, tiscali qui fut ensuite repris par Scarlet), après 20 ans, je change et je redécouvre les joies de ce qui marche BIEN
globox3
Habitué
Habitué
 
Message(s) : 477
Inscription : 08 Fév 2010 17:24

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 27 Jan 2021 17:11

csam a écrit :
mackguil a écrit :
csam a écrit :Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.
__
CS

Ce n'est pas la 7.13, l'actuelle ?
FRITZ!OS : 07.13 - Version actuelle
Oui, 7.13, sorry

Oui, en Belgique le dernier firmware officiel pour la 7530 est le 07.13 (comme pour la 7490 c'est le 07.12).
Partout ailleurs, le dernier firmware est le 07.21 (les versions 07.24BETA annoncent une future 07.25).

De ma propre expérience sur 7490 et de nos amis de userbase sur 7530/7590, depuis aout 2020 le firmware 07.21 est accepté sans souci de fallback sur la ligne VDSL,
  • soit avec le pilote précédent (celui du 07.12)
  • soit avec le pilote par défaut qui est apparemment en cours de validation.
Dernière édition par Obbo le 27 Jan 2021 17:17, édité 3 fois.
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 27 Jan 2021 17:14

globox3 a écrit :
csam a écrit :Rien de neuf pour les 7530 ? Elles sont toujours en 7.14 actuellement.
__
CS

https://en.avm.de/fileadmin/user_upload ... -85567.zip
Par contre, pour la 7530 attention aux changements de pilotes DSL dans les firmware beta, car ils essaient d'autres versions non validées ! :-?
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par csam » 27 Jan 2021 21:01

Sur la 7530 il ne semble pas possible d'utiliser un driver 7.13 avec une 7.21 par exemple. Je n'ai pas trouvé la case adéquate.

__
CS
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 27 Jan 2021 23:41

csam a écrit :Sur la 7530 il ne semble pas possible d'utiliser un driver 7.13 avec une 7.21 par exemple. Je n'ai pas trouvé la case adéquate.
La fonctionnalité 'Utiliser la version DSL précédente' n'est pas (encore) présente sur le 07.13, elle apparait seulement à partir du 07.20.

À noter, les firmware 07.20 (puis 07.21) sont aussi OK depuis plusieurs mois :
philippe_d a écrit :
7530 : 07.20 / 07.21
    pilote par défaut = 1.180.131.54 : 'temporairement approuvé' (pendant la procédure d'agréation).
    pilote précédent = 1.180.129.93 : approuvé (07.13)
7530 : 07.24 (Beta)
    pilote par défaut = 1.180.131.56 : non-approuvé
    pilote précédent = 1.180.129.93 : approuvé (07.13)
Source
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par csam » 27 Jan 2021 23:49

Donc je pourrais essayer la 7.24 en maintenant le driver 7.13 puisque la case devrait apparaître.
C'est la version internationale qu'il faut utiliser ou une version pré-belge ?

__
CS
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par Obbo » 27 Jan 2021 23:57

csam a écrit :Donc je pourrais essayer la 7.24 en maintenant le driver 7.13 puisque la case devrait apparaître.
C'est la version internationale qu'il faut utiliser ou une version pré-belge ?
Oui, version internationale : ftp://ftp.avm.de/fritzbox/fritzbox-7530/other/fritz.os/.
En fait, la version 'belge' dans le répertoire belgium est la version internationale limitée à la version officiellement approuvée par Proximus afin que la mise à jour automatique d'une Fritz!Box paramétrée sur 'Belgique' soit limitée au dernier firmware approuvé.
Dernière édition par Obbo le 30 Jan 2021 17:15, édité 1 fois.
Edpnet 100/40(30) & OVH VoIP // Fritz!Box 7490 (07.56 1.100.136.43) // AS6706T // Shield & Kodi Nexus // DS212j // BE550G-FR // K400+ // 65SM8600 & Voo CI+
Obbo
Membre
Membre
 
Message(s) : 156
Inscription : 13 Avr 2011 09:17
Localisation : HUY

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message par csam » 28 Jan 2021 11:07

Je vais essayer cela. J'avais mis la 7.21 int. Mais le débit a vite baissé. Je retente.

__
CS
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

PrécédentSuivant

Retour vers Routeur/Adsl

Qui est en ligne ?

Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit

cron