Syncro+vitesse instable - ADSL Home

[MasterB]

Je voudrais un avis tiers par rapport à la conclusion d'Edpnet par rapport au problèmes si dessous. Doit-je accepté le downgrade à 6mbit sans broncher? A la demande d'EDPnet. J'ai fait tout les tests de synchro et stabilité avec 2 modems différents directement sur l'arrivée de la ligne dans la cave. Problèmes identiques: lenteur pour avoir synchro, pertes de synchro, vitesse instable, etc.
En dessous les résultats des tests fait par EDPnet. Que en pensez vous?


PPP/Virtual 23/02/2009 7:47:57 213.219.143.171 2 MBs 64 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 23:36:27 22/02/2009 23:38:08 213.219.133.199 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:56:55 22/02/2009 23:36:24 212.71.11.112 4 MBs 82 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:50:22 22/02/2009 22:54:31 213.219.134.251 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:48:09 22/02/2009 22:50:05 212.71.13.109 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:46:42 22/02/2009 22:48:07 212.71.13.109 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:38:09 22/02/2009 22:46:10 212.71.13.109 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:31:30 22/02/2009 22:37:24 213.219.143.130 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:27:07 22/02/2009 22:30:15 213.219.144.146 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119 PPP/Virtual 22/02/2009 22:23:57 22/02/2009 22:26:04 213.219.145.72 0 MBs 0 MBs 213.219.132.213:2147483647 vil-rb01.mpl=2A14/3=2A49=2A119

- Completed (XML) ? ok
- Is there a line tone present ? ok
- Is end-user internal cabling OK (modification, ...) ? ok
- Is the router/modem connected on the DSL line ? ok
- Is the power led on ? ok
- Is the CD / Sync led on ? ok
- Router/modem reset executed ? ok

*** NOTES 23/02/2009 10:19:36 PPETILLI Action Type: Manager review
Parameter summary
Parameters Upstream Downstream
Actual bitrate [kb/s] 1021 9996
Attainable bitrate [kb/s] 1153 13876
Rel. capacity occupation [%] 88 72
Attenuation [dB] 15 32
Noise margin [dB] 10,4 8,2
Actual PSD [dBm/Hz] - 38,1 - 43,3
Output power [dBm] 12,2 19,2
User traffic [octets] 79846210999 73274605690

service stability is not good as of 15/02
xDSL performance doesn't indicate problems



24/02/2009 14:53:11
*** NOTES 24/02/2009 14:52:03 websupport
*** Logged by contact:
****** START OF NOTE ADDED BY CUSTOMER ******
As sync test shows nothing wrong, we want a SELT test.
Modem is turned off since now.



Inspection details
Description
Reliability Low

Analysis results Current
Measurement timestamp 24/02/09 14:55
Termination type Unknown
Length 2415 m [+/-] 250 m
Attenuation @ 300 kHz 27,9 [dB]
Capacity
Capacity not estimated
Bridged tap Not detected
Upstream attenuation estimated by DELT 15.0 [dB]
Upstream attenuation estimated by SELT 19.1 [dB]
Detected faults No fault detected


25/02/2009 15:00:16
*** NOTES 25/02/2009 14:48:48 YWARNIMO Action Type: Manager review
according to the BGC llu tool : active line test for 023443535

Inquiry for active technical situation ( active pair )
The Results for the Inquiry for active technical situation ( active pair ) based on Dial Number xxxxxxxxxx are as follows:

Input Details :
Telephone Number : xxxxxxxxx
Product Chosen : BRUO Shared Pair
Demanded Services : Length Check.

Existing Technical Situation :
Network : 02UKK0 (VTP)
Ldc : 000
Street Cabinet closest to MDF :
Street Cabinet - Intermediate :
Street Cabinet closest to Client : 111
Loop Type : 1/2
Type of Intro Pair : Return

Pair conditioning of existing TI for demanded service :
Galvanic Pair? : Y
Pair selection rules respected? : Y

Length Assessment :
(1)Inventory : Y
Min : 2277 meters
Max : 2289 meters

Attenuation Data :
Min : 2,6870 dB
Max : 2,6980 dB