Personne n'a encore testé la 7.24 ?
https://en.avm.de/fritz-lab/fresh-from- ... velopment/I. New Features, Improvements and Updates in this Lab
=====================================================
#New functions of FRITZ!OS
## Internet:
- **NEW** Prioritization of a network device above all others; this property can be enabled in the "Details" of the device in the home network
##DECT/FRITZ!Fon:
- **NEW** New start screen with current weather information
##Smarthome:
- **NEW** Roller shutter control via the FRITZ!Box user interface
- **NEW** Roller shutter control via FRITZ!DECT 440
#Further Improvements of FRITZ!OS
## Internet:
- **Improved** Management of tickets in parental controls
- **Improved** Device status (active/not active) is displayed in the selection of devices for port sharing
- **Improved** Clearer display of port sharing overview on mobile devices
- **Improved** Assignment to devices added to the access profile settings in the parental controls
- **Improved** Optimized retry function for DNS over TLS (DoT)
- **Improved** Port sharing allowed when the requesting IP address and destination IP are not the same but reference the same physical device
- **Improved** Event message when port 80 temporarily released for sharing in order to issue certificate for letsencrypt.org
- **Improved** DNS over TLS (DoT) more robust for remote sites that are missing or do not respond
- **Improved** DNS over TLS (DoT) more robust through less frequent latency measurement
- **Improved** For internet access via LAN 1 speeds higher than 1 Gbit/s can now be configured in the user interface
- **Fixed** Formatting errors occured in the configuration of IPv6 routes
- **Fixed** VPN connections via L2TP (e.g. in Windows 10) were unexpectedly slow
## Wireless:
- **Improved** Reworked "Wi-Fi / Wi-Fi Channel" page
- **Improved** Better stability
- **Improved** Improved messages on Wi-Fi under "System / Event Log"
- **Improved** Detection of multiple parallel WPS activations improved
- **Improved** Better stability
- **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language
- **Improved** Improved auto channel function after detection of interference sources (5-GHz band)
- **Improved** New message under "System / Event Log" when the maximum number of wireless repeaters is exceeded
- **Change** In "Mesh Repeater" operating mode, only Wi-Fi networks with visible names are shown for selection of the Mesh Master
## Telephony:
- **Improved** Completely reworked settings pages for call diversion and call blocks
- **Improved** Option added for call diversion to a certain local telephone
- **Improved** First Configuration wizard offers configuration of a telephone
- **Improved** Better compatibility of the FRITZ!Box's SIP registrar to the SIP client Line Phone
- **Improved** Better compatibility to telephone providers Easybell and VoIPfoneUK
- **Improved** Enhanced compatibility for encrypted telephony
- **Improved** For country setting "Germany" and telephone number configured automatically by provider, the area code included in the number is detected automatically and adopted in the line settings
- **Improved** Integration of multiple CardDAV telephone books supported
- **Improved** Forwarding of calls accepted on Snom IP telephones supported without query
- **Improved** Stability
- **Improved** Setting for using internal fax machine added to "Send Faxes Only"
- **Improved** The "Email" and "RSS" tabs are hidden in the "Telephony / Telephony Devices" menu when DECT is switched off
- **Improved** Display and management of entries in telephone books completely reworked (among others, photo visible in overview, columns can be selected for display, and selection of multiple entries added as well as copying and moving entries between telephone books)
- **Improved** Settings for sending and receiving faxes combined under "Telephony / Telephony Devices"
- **Change** New network configuration taken into account for telephony provider Tiscali (Italy)
## Home Network:
- **Fixed** The section for blocking devices was displayed in the device details of guest devices even though this function is reserved for home network devices
## System:
- **Improved** Configuration wizard can be interrupted and resumed
- **Improved** A password can be made visible during entry ("eye") in the user interface
- **Improved** Various improvements in the First Configuration wizard
- **Improved** Query when leaving a website after changing settings
- **Improved** After a dispatch of support data to AVM is concluded, a second displatch can be started immediately without any wait time
- **Change** Offer to switch to "Level III: Notify me about new versions of FRITZ!OS and install new versions automatically (recommended)" appears after updating only when "Level II: Notify me about new versions of FRITZ!OS and install necessary updates automatically" is configured
Mobile Communications:
- **Improved** Country-specific list of mobile network providers when FRITZ!Box used with a USB mobile network dongle (not for mobile network boxes)
- **Improved** Mobile network provider "Magenta Mobil" added for Austria
- **Improved** Support for Huawei E3372h-320 USB mobile network dongle
------------------------------------------------------------
[1] Notes on the Start Screen "Weather Forecast"
Le petit truc qui me plait c'est le support de dungle usb 4G récent :
https://www.amazon.fr/E3372h-320-d%C3%A ... B087ZC57CLhttps://www.amazon.de/-/en/HUAWEI-Unloc ... B087ZC57CLTrès utile comme solution de backup en cas de panne chez Proximus ou une attaque DDOS chez EDP
Pour info , en cas de panne chez Proximus, Proximus vous donne une carte SIM avec x Giga dessus et valable pour une période donnée. Gardez la sim même après. Car en cas de panne futur, vous pourrez leur demander d'activer à distance gratuitement cette carte SIM. (cas vécu)
Publié : 09 Oct 2020 10:39
Si c'est juste pour faire modem la Bbox3 etait suffisante (enfin ce n'est que mon avis).
) et remise en route du système sans accros.
