Page 42 sur 47

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 18 Fév 2020 22:03
par djksage
Bonjour, avec les dernières mise à jours, est-ce que les décodeurs V6 sont-ils compatibles ?

J'ai un ami qui voudrait changer sa bbox3 mais il a un V6 chez lui

Merci pour l'info :-)

Envoyé de mon HD1913 en utilisant Tapatalk

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 19 Fév 2020 07:22
par alloja
Ce n’est pas lié aux fritzbox mais bien au v6 cette incompatibilité et je ne pense pas qu’une compatibilité de ces deux appareils soit prévue par Proximus. Attendons le v7...

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 05 Mars 2020 21:04
par Obbo
Salut.

Attention aux 'early adopters' :headbang: qui jouent avec les versions beta=labor pour la 7490.

Les FW 7.11, 7.12 et tous les (labor) 7.19-xxxxx sortis jusqu'ici contenaient le driver DSL par défaut 1.100.136.39 et le driver DSL de secours (previous) 1.100.133.44, tous les deux WHITELISTED pour le réseau belge.

Hier soir est sortie la version labor 7.19-76429 qui contient un nouveau driver DSL 1.100.136.41 NOT-WHITELISTED :angryfire: .
Il faut bien penser à passer sur le driver DSL de secours (previous) qui est, bonne surprise, le 1.100.136.39 :D donc WHITELISTED pour le réseau belge.

Pensez à ne pas laisser les maj. (qui marchent bien de beta à beta) en automatique, sinon c'est 8d fallback garanti :roll:

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 06 Mars 2020 15:53
par Billmarcel
J'avais le firmware labor 7.19-75736 installé sur ma 7490, depuis une paire de mois.
Cette nuit, un upgrade (automatique) c'est fait vers le firmware 07.19-76429 BETA.
J'ai constaté ce matin que j'était en profil "repair" (7.5/0.5).
J'ai donc coché "Utiliser la version DSL précédente", et appelé le 02/265 22 70 pour lancer un TBF.
Très vite, la Fritz est repassée de 7.5/0.5 à 70/30. Reste plus qu'à attendre le passage du DLM, pour retrouver du 85 ou 100 en Down et 35 en Up.

Donc le firmware 7.19-76429 BETA fonctionne en cochant la version du driver DSL précédente soit la 1.100.139.39. La 1.100.139.41 faisant tomber en profil "repair".
J'ai aussi désactivé la mise à jour automatique.
Question de vous faire part de mon expérience.

Entre-temps, passer en 85/30.

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 06 Mars 2020 17:22
par Obbo
Oui Billmarcel, ton expérience est totalement identique à ce que j'ai expliqué hier dans le post précédent.
Mais une expérience de plus n'est jamais inutile, merci donc.
Pour rassurer sur le DLM, j'ai récupéré un profil provisioning 70/30 dès le TBF et un profil 100/30 trois heures plus tard.
Petite question quand même : ce n'est plus le 0800.224.24 pour le TBF ?

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 06 Mars 2020 17:37
par Billmarcel
Non, c'est le 02/265 22 70 (pour EDPnet) et demander un TBF à l'opérateur. Très réactif.

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 07 Mars 2020 11:46
par carabao
Bonjour

La mise à jour d'une BETA vers une version stable est-elle possible ? Ou faut-il utiliser pour commencer les programmes recovery pour revenir à une version stable précédente avant d'installer la nouvelle version stable ?

Merci

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 07 Mars 2020 12:53
par Obbo
Salut carabao.
Les versions labor=beta se comportent comme les autres.
Il n'est pas nécessaire de passer par un recovery.

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 07 Mars 2020 13:04
par Obbo
Billmarcel a écrit :Non, c'est le 02/265 22 70 (pour EDPnet) et demander un TBF à l'opérateur. Très réactif.

OK, le 0800 ne fonctionne apparemment plus que pour les clients Proximus.
Pour ma part, je fais une demande par ticket de support, et edpnet est là aussi très réactif :D

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 07 Mars 2020 13:05
par carabao
Obbo a écrit :Salut carabao.
Les versions labor=beta se comportent comme les autres.
Il n'est pas nécessaire de passer par un recovery.


Merci

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 06 Avr 2020 10:18
par Obbo
Bonjour à tous.

Nouveau Firmware LABOR=BETA pour la Fritz!Box 7490 :

Firmware complet : https://en.avm.de/fileadmin/user_upload ... -77060.zip
Version: 7.19-77060 - Date: 2 avril 2020
Pilotes DSL : identiques à ceux de la version labor 7.19-76429, à savoir :
- Défaut : 1.100.136.41 (ne pas utiliser sur le réseau Proximus)
- Précédent : 1.100.136.39 (Proximus OK)

Changelog complet de la version 7.19, avec le détail pour chaque version lab : http://download.avm.de/labor/PSQ19/7490/infolab-en.txt

NB1 : il est notifié/installé automatiquement par la FritzBox aux utilisateurs qui ont une version labor.
NB2 : attention, depuis toujours, toute mise à jour décoche la case "pilote précédent". Puisque le pilote par défaut n'est pas OK, il faut absolument re-cocher cette case dès la mise à jour finie, sans quoi elle va tomber en profil fallback.
NB3 : attention, depuis cette version lab, la procédure de maj propose de remettre par défaut la maj automatique, ce qu'il faut refuser pour rester en maj manuelle avec notification, pour pouvoir réaliser la manipulation vue au NB2. Sinon, elle risque de faire une maj pendant la nuit...

Bien cordialement.

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 13 Avr 2020 10:21
par poussun01
Bonjour

J'ai mis à jour vers la 07.19-77201 BETA, avec le driver DSL précédent
Version (device driver): 1.100.136.39

Aucun problème :)

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 13 Avr 2020 11:03
par Obbo
Nouveau Firmware LABOR=BETA pour la Fritz!Box 7490 :

Firmware complet : https://en.avm.de/fileadmin/user_upload ... -77201.zip
Version: 7.19-77201 - Date: 8 avril 2020
Pilotes DSL : identiques à ceux de la version labor 7.19-76429, à savoir :
- Défaut : 1.100.136.41 (ne pas utiliser sur le réseau Proximus)
- Précédent : 1.100.136.39 (Proximus OK)

Changelog complet de la version 7.19, avec le détail pour chaque version lab : http://download.avm.de/labor/PSQ19/7490/infolab-en.txt

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 24 Avr 2020 06:59
par Billmarcel
Nouvelle version du firmware Labor: 7.19-77568.
Rien de neuf rapport au 77201.
Il faut toujours cocher "Utiliser la version DSL précédente".

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 24 Avr 2020 23:01
par Eric
quelques améliorations dans cette version

--- Further Improvements and additional bug fixes in FRITZ!OS 7.19-77568/77553/77569 (within FRITZ!Labor) ---

Internet:
• Improved Blocked network devices now also displayed on the start page
• Improved Reworked troubleshooting for active device block
• Improved Improved stability for VPN connections
• Fixed Troubleshooting for device block was incomplete
• Fixed On DS-Lite lines, the IPv4 address of the FRITZ!Box home network was displayed as external IPv4 address
• Fixed When devices restricted for a VPN connection, only the first device could use this VPN connection
• Fixed Parental controls prevented access to network devices via VPN
• Fixed Incorrect rendering of downloads in the "Online Monitor"
Wireless:
• Improved Messages on radar under "System / Event Log / Wi-Fi" completed
• Fixed Crash possible when fixed Wi-Fi channel was set (repeater only)
• Fixed After interrupted switch of channels, connection was lost
• Fixed Problems occurred when registering wireless devices with the "Connect/WPS" button
Mesh:
• Improved Channel bandwidth taken into consideratio for Mesh steering decisions
• Fixed Activation of "WPA/WPA2" mode was not adopted by FRITZ!Repeaters in the Mesh
Telephony:
• Fixed Various bug fixes for CardDAV and iCloud telephone books
Home Network:
• Fixed Access profile of parental controls could no longer be changed in the device details
System:
• Fixed Empty page for multiple execution of "Diagnostics / Security"
• Fixed Recurring restarts in connection with a special setting for fax reception

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 30 Avr 2020 23:22
par Obbo
Nouveau Firmware LABOR=BETA pour la Fritz!Box 7490 :

Firmware complet : https://en.avm.de/fileadmin/user_upload ... -77732.zip
Version: 7.19-77732 - Date: 27 avril 2020
Pilotes DSL : identiques à ceux de la version labor 7.19-76429, à savoir :
- Défaut : 1.100.136.41 (ne pas utiliser sur le réseau Proximus)
- Précédent : 1.100.136.39 (Proximus OK)

Changelog complet de la version 7.19, avec le détail pour chaque version lab : http://download.avm.de/labor/PSQ19/7490/infolab-en.txt

Pour cette version :
Code : Tout sélectionner
Further Improvements of FRITZ!OS  07.19-77732/77734 (within FRITZ!Labor)

Internet:
•   Improved Prevention of fallback scenarios with DNS over TLS (DoT) when the FRITZ!Box is offline
•   Fixed Misleading display after disabling FTP when FTP internet access was not enabled
•   Fixed IP Client with DHCP operating mode could no longer be configured in some cases
•   Fixed Device at a repeater's Wi-Fi guest acces occasionally did not receive an IP address
•   Fixed Upload of large files to FRITZ!NAS was not possible
•   Fixed Incorrect display in the Online Monitor of load on internet connection by guests

Wireless:
•   Fixed Incorrect confirmation dialog when encryption mode changed
•   Fixed Incorrect channel bandwidth displayed for Wi-Fi guest access after radar detection
•   Fixed Displays for bandwidth and number of Wi-Fi streams were incorrect for repeater connections
•   Fixed Problems during combined use of WPS and auto channel

Telephony:
•   Improved Better stability
•   Improved Enhanced compatibility for encrypted telephony for connections across networks
•   Fixed Import of contacts to the iCloud and CardDAV telephone book failed with error code 20
•   Fixed CardDAV telephone book for providers like nextcloud/owncloud did not synchronize any sub-telephone books
•   Fixed Manual configuration of telephone numbers failed for Vodafone provider
•   Fixed Incorrect message when fax function configured without telephone number assignment

DECT:
•   Fixed Public hotspot could not be switched with DECT handset

System:
•   Fixed Inconsisten progress display in the wizard for first configuration

Mobile Communications:
•   Fixed  Huawei 3372 LTE dongles were sporadically detected as tethering devices, even though the dongle's firmware does not support tethering
•   Fixed  Incorrect PIN/PUK treatment for 4G Systems W1208 dongle when the dongle was already inserted when the FRITZ!Box was started

Re: FRITZ!Box 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 06 Mai 2020 14:20
par Obbo
Nouveau Firmware LABOR=BETA pour la FRITZ!Box 7490 :

Firmware complet : https://en.avm.de/fileadmin/user_upload ... -78142.zip
Version: 7.19-78142 - Date: 6 mai 2020
Pilotes DSL : identiques à ceux de la version labor 7.19-76429 et suivantes, à savoir :
- Défaut : 1.100.136.41 (ne pas utiliser sur le réseau Proximus)
- Précédent : 1.100.136.39 (Proximus OK)

Changelog complet de la version 7.19, avec le détail pour chaque version lab : http://download.avm.de/labor/PSQ19/7490/infolab-en.txt

Pour cette version :
Code : Tout sélectionner
Further Improvements of FRITZ!OS 07.19-78142 (within FRITZ!Labor)

Internet:
•   Fixed During configuration of a VPN tunnel for selected LAN ports on the FRITZ!Box, devices connected to those ports were not able to access the internet
•   Fixed Unexpected restriction on reaching certain websites when blacklist enabled

Wireless:
•   Improved Auto channel function further optimized
•   Fixed First configuration of the FRITZ!Box failed at "Existing connection over Wi-Fi"
•   Fixed Incorrect display of current data rates on the "Wi-Fi / Wi-Fi Network" page for Wi-Fi connection (2.4 GHz) to the Mesh Master

Mesh:
•   Improved Stability of connection between FRITZ!Repeaters and FRITZ!Box improved in certain situations
•   Fixed LAN guest access was not switched on/off on the FRITZ!Box working as a Mesh Repeater when only 2.4 GHz enabled on the Mesh Master

Telephony:
•   Fixed Telephone numbers could not be managed in mobile view (with iOS)

System:
•   Fixed Welcome page to lab with information on new features could not be closed in iOS 13
•   Fixed Empty page in the statistics of the Energy Monitor when "Italian" set as language
•   Fixed Configuration of telepone numbers and telephony devices missing in the Configuration wizard
•   Fixed Incorrect display of the "Password" field under "System / Backup"
•   Fixed Attempt to import a configuration generated with lab firmware failed under some circumstances

Smart Home:
•   Fixed  Template for radiator control did not work if heating was off during 01/01 until 31/12


À noter que si un FRITZ!Fon C5 est dans le réseau, il maj son firmware de la version 4.54 à 4.56 :
Code : Tout sélectionner
•   New: Improved echo cancellation for the opposite side
•   Fixed: Scrolling text stops at wrong position
•   Fixed: Answering machine, possibly without symbol
•   Fixed: Phonebook navigation with non-displayable characters and activated Smart Phonebook
•   Fixed: unnecessary synchronization of the phone book in the event of a brief basic loss

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 13 Mai 2020 20:20
par Obbo
Nouveau Firmware LABOR=BETA pour la FRITZ!Box 7490 :

Version: 7.19-78391 - Date: 12 mai 2020
Pilotes DSL : identiques à ceux de la version labor 7.19-76429 et suivantes, à savoir :
- Défaut : 1.100.136.41 (ne pas utiliser sur le réseau Proximus)
- Précédent : 1.100.136.39 (Proximus OK)

Changelog complet de la version 7.19, avec le détail pour chaque version lab : http://download.avm.de/labor/PSQ19/7490/infolab-en.txt

Pour cette version :
Code : Tout sélectionner
Further Improvements of FRITZ!OS 7.19-78391/78393 (within FRITZ!Labor)

Internet:
Fixed After resetting two-factor authentication for MyFRITZ! (myfritz.net), FRITZ!OS continued to show two-factor authentication as “active”
Fixed Occasional VPN connection disruptions under high load
Fixed Occasional restarts at night

Wireless:
Improved Display of real maximum data rate of wireless device rather than the theoretically possible data rate
Fixed Connection losses of wireless devices at the 5-GHz AP (FRITZ!Box with ZeroWaitDFS function)

Telephony:
Improved Further optimization of the mobile view for managing telephone numbers
Improved Minor adjustments for various telephony provider profiles in Italy and the Netherlands
Fixed When creating and editing telephone numbers under “Other provider”, the password was requested
Fixed Incorrect rendering of regional prefix during editing

System:
Fixed After set to IP client mode, a fixed IP address was always configured

USB:
Fixed Network drive function (SMB) for overwriting files on “fritz.nas” in Windows 10 started only with a long delay

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 14 Mai 2020 16:23
par globox3
petite frayeur aujourd'hui en faisant la mise à jour de la BETA sur un 7490 ....

PLUS RIEN et en plus ce routeur qui fait partie d'un mesh est caché et mes NAS son connectés dessus .....

mais alors rien de rien .... après 20 min j'accède à la bête et je vois la led info rouge,, un coup d'oeil sur leur site et "Erreur : suivez les instructions qui vous sont données sur la page « Aperçu » de l’interface utilisateur."

et quand on n'a pas accès à la page utilisateur?????

J'applique le patch miracle microsoft (débranche et rebranche) et ouf tout va bien .... des sueurs froides à postériori car j'ai aussi fait la mise à jour de matos similaires à 2000km de distance et je me voyais mal y aller pour faire la même chose ....

Re: FritzBox 7360/7490/3490/7430 Full Vectoring approved

Message Publié : 14 Mai 2020 16:52
par mackguil
globox3 a écrit :
J'applique le patch miracle microsoft (débranche et rebranche) et ouf tout va bien ....

:lol: :lol: :lol: