FritzBox 7590

Si vous avez un problème ou une solution à un problème ou une astuce avec ce type de modem, postez donc l'info ici

Modérateur: Barbapapa

Re: FritzBox 7590

Message par globox3 » 06 Mai 2021 17:43

Nouveau firmware 7.27 dispo et version 7590ax Wifi6 en approche

DSL driver: 1.180.131.76
Previous DSL driver: 1.180.129.93

https://download.avm.de/fritzbox/fritzb ... 7.27.image
Fidèle au même opérateur (Wanadoo, tiscali qui fut ensuite repris par Scarlet), après 20 ans, je change et je redécouvre les joies de ce qui marche BIEN
globox3
Habitué
Habitué
 
Message(s) : 477
Inscription : 08 Fév 2010 17:24

Re: FritzBox 7590

Message par Eric » 06 Mai 2021 19:31

la 7590 ax est déjà sortie pour les beta testeurs. Un copain Allemand en a reçu une il y a quelques semaines.

Le prix 269 Euro de cette nouvelle box semble correct vu la qualité des FritzBox

https://boxmatrix.info/wiki/FRITZ!Box_7590_AX
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par @lan » 06 Mai 2021 21:53

Le Wifi est une chimère, l'idéal sans fil existera sûrement un jour ou l'autre, mais quand ?
Exemple : du Wifi6 au Wifi6E il faudra déjà une autre puce. Et l'évolution du Wifi6E en 2023 qui prévoit un update firmware sur la même puce...
Et, on parle en labo du Wifi7........
Alan
@lan
Membre
Membre
 
Message(s) : 57
Inscription : 03 Jan 2011 16:24
Localisation : Marcinelle

Re: FritzBox 7590

Message par kalima » 07 Mai 2021 09:12

Les 7530-AX ont un firmware indépendant , je pense que le nouveau 7.27 de la 7590 n'est que pour la 7590, la version AX aura sa propre version
Proximus Internet Maxi (VDSL2 : 100mbps/30mbps@166m) // Fritz!Box 7590-7.55 (DSL Driver Native) // 2XAsus RT-AX86U(1xMain/1XAiMesh) Asus-Merlin388.2.2 // Shield 2019Pro + Kodi V21 Alpha for DV
kalima
Membre
Membre
 
Message(s) : 105
Inscription : 04 Oct 2019 11:44

Re: FritzBox 7590

Message par Eric » 07 Mai 2021 10:59

Oui car le Wifi6E utilise une nouvelle bande de fréquence.
Le Wifi 7 (802.11be) c'est normal qu'il soit en cours de recherche car qui n'évolue pas régresse ;-)
L'on parle de 46Gbps

https://www.inpact-hardware.com/article ... n-attendre

Il y a déjà des routeurs Wifi 6E dans le commerce mais c'est hors de prix (499 $)
https://www.linksys.com/us/wireless-rou ... /p-mr7500/

2022 il n'y aura encore que 20% des achats de routeurs Wifi 6E
Il y aura donc une nouvelle Fritzbox qui arrivera.



@lan a écrit :Le Wifi est une chimère, l'idéal sans fil existera sûrement un jour ou l'autre, mais quand ?
Exemple : du Wifi6 au Wifi6E il faudra déjà une autre puce. Et l'évolution du Wifi6E en 2023 qui prévoit un update firmware sur la même puce...
Et, on parle en labo du Wifi7........
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par globox3 » 02 Juin 2021 08:32

Pour info je suis passé en 7.27 et un bug bizarre que j'avais avec mon mesh (1x7590 et 2x7490 cablés en ethernet) a disparu. J'avais parfois un débit limité à 100Mb/s entre les box voire moins. tout est revenu en ordre en 1Gb/s entre les box.
Fidèle au même opérateur (Wanadoo, tiscali qui fut ensuite repris par Scarlet), après 20 ans, je change et je redécouvre les joies de ce qui marche BIEN
globox3
Habitué
Habitué
 
Message(s) : 477
Inscription : 08 Fév 2010 17:24

Re: FritzBox 7590

Message par djksage » 04 Juin 2021 12:40

Hello, je viens de faire la mise à jours en 7.27 mais je n'est pas trouvé l'option à cocher pour le driver précédent, je suis donc en 1.180.131.76 depuis 20 min avec une vitesse de 100/35

A voir si ça tiens dans le temps où si je passe en fallback d'ici se soir

Envoyé de mon LE2113 en utilisant Tapatalk
djksage
Membre
Membre
 
Message(s) : 44
Inscription : 30 Nov 2011 22:23

Re: FritzBox 7590

Message par globox3 » 04 Juin 2021 12:54

djksage a écrit :Hello, je viens de faire la mise à jours en 7.27 mais je n'est pas trouvé l'option à cocher pour le driver précédent, je suis donc en 1.180.131.76 depuis 20 min avec une vitesse de 100/35

A voir si ça tiens dans le temps où si je passe en fallback d'ici se soir

Envoyé de mon LE2113 en utilisant Tapatalk

Faut dire qu'il est bien caché, il faut être en mode avancé,
Ensuite Internet>Informations DSL onglet Paramètres de la ligne, Cliquer sur configuration de l'insensibilité aux interférences, et enfin tu as la case à cocher Version DSL
Fidèle au même opérateur (Wanadoo, tiscali qui fut ensuite repris par Scarlet), après 20 ans, je change et je redécouvre les joies de ce qui marche BIEN
globox3
Habitué
Habitué
 
Message(s) : 477
Inscription : 08 Fév 2010 17:24

Re: FritzBox 7590

Message par djksage » 04 Juin 2021 13:03

Merci beaucoup, je m'attendais à une option a cocher lors de la mise à jours, je viens de le faire au cas où ;-)

Envoyé de mon LE2113 en utilisant Tapatalk
djksage
Membre
Membre
 
Message(s) : 44
Inscription : 30 Nov 2011 22:23

Re: FritzBox 7590

Message par kalima » 13 Juin 2021 08:30

@Globox3

tu as du mettre le DSL Previous Drivers ou c'est stable avec le dsl driver 1.180.131.76 ?
Proximus Internet Maxi (VDSL2 : 100mbps/30mbps@166m) // Fritz!Box 7590-7.55 (DSL Driver Native) // 2XAsus RT-AX86U(1xMain/1XAiMesh) Asus-Merlin388.2.2 // Shield 2019Pro + Kodi V21 Alpha for DV
kalima
Membre
Membre
 
Message(s) : 105
Inscription : 04 Oct 2019 11:44

Re: FritzBox 7590

Message par globox3 » 15 Juin 2021 14:57

je n'ai pas pris le risque et j'ai mis la version précédente, je ne sais pas si quelqu'un a eu des problèmes sans le faire
Fidèle au même opérateur (Wanadoo, tiscali qui fut ensuite repris par Scarlet), après 20 ans, je change et je redécouvre les joies de ce qui marche BIEN
globox3
Habitué
Habitué
 
Message(s) : 477
Inscription : 08 Fév 2010 17:24

Re: FritzBox 7590

Message par Rex69 » 22 Juil 2021 14:28

Nouveau Firmware 7.28 disponible.

DSL driver: 1.180.131.76
Previous DSL driver: 1.180.129.93

https://download.avm.de/fritzbox/fritzbox-7590/other/fritz.os/FRITZ.Box_7590-07.28.image
Rex69
Membre
Membre
 
Message(s) : 15
Inscription : 28 Août 2006 15:23

Re: FritzBox 7590

Message par Eric » 25 Juil 2021 10:15

https://download.avm.de/fritzbox/fritzbox-7590/other/fritz.os/

Pour rappel : “Utiliser le driver DSL de la version précédente”. Alors il n'y a aucun risque.

# Additional improvements in FRITZ!OS 7.28

## System:
- **Improved** Increased stability

## Telephony:
- **Change** Necessary adaptation to changed demands for authentication with Google (Google telephone book and calendar)
- **Improved** Better interoperability for CardDAV-based online telephone contacts
- **Improved** Necessary adaptation to changed demands for authentication with Google (Google telephone book and calendar)

## Wi-Fi:
- **Improved** Better stability

## USB:
- **Fixed** No network drive connection (SMB) was possible with macOS Big Sur Version 11.3

# Further Improvements of FRITZ!OS 7.27

## Internet:
- **Improved** Deutsche Telekom: Automatic configuration of telephone numbers (EasySupport) for connection via WAN/LAN 1 with a fiber optic modem
- **Fixed** VPN connections on the basis of third-party providers were sometimes interrupted after long connection times
- **Fixed** Wireless devices in the home network could not always be accessed via VPN

## Wireless:
- **Improved** Better stability
- **Fixed** Possible problems while registering repeaters after changing Wi-Fir encryption from "WPA2+WPA3" to "non-encrypted"
- **Fixed** WPS for the Wi-Fi Guest Access did not work reliably with non-encrypted Wi-Fi
- **Fixed** The legend under the "Allocation of Wi-Fi Channels" diagram was not rendered in a single line ("Wi-Fi /Wi-Fi Channels" page))
- **Fixed** Vulnerabilities in the processing of incoming fragmented frames and aggregated MPDUs (A-MPDU) fixed ("Fragatttack")


## Telephony:
- **Change** Necessary change for use of a Google online telephone book in the future
- **Fixed** After editing CompanyFlex Cloud PBX telephone numbers, these numbers were no longer registered
- **Fixed** No display of call blocks if these included an entry without a telephone number
- **Fixed** Searches in the telephone book could be performed using a name, but not a telephone number
- **Fixed** Configuration of internal fax function not possible when a telephone book contained an entry without a telephone number
- **Fixed** During use of encrypted telephony, if a caller cancels a call before it is picked up, telephones on the FRITZ!Box could ring endlessly
- **Fixed** Occasionally, three-party conferences did not work on an analog telephones

## DECT:
- **Fixed** After long operation times, certain functions were sometimes no longer available (e.g. media player, search for updates...)

## System:
- **Change** Push Service: Various corrections to content of "Change notice" email
- **Fixed** The code of the Google Authenticator could not always be entered on the user interface


# New functions of FRITZ!OS 7.25

## Internet:
- **NEW** Prioritization of a home network device can now be enabled on the FRITZ!Box user interface

## Telephony:
- **NEW** Fax function: Log for received and sent faxes
- **NEW** Support for the "Telekom CompanyFlex" business telephony platform (SIP trunk and cloud PBX)

## DECT/FRITZ!Fon:
- **NEW** New start screen with current weather information (currently only available for germany)

## Smarthome:
- **NEW** FRITZ!DECT 440 measures humidity and allows its display with FRITZ!App Smart Home and FRITZ!Fon
- **NEW** FRITZ!DECT 440 displays the QR code for simple connection with the Wi-Fi guest access
- **NEW** Smart Home: Lightsequence "Wakeup/Sleep" for FRITZ!DECT 500 and compatible DECT LEDs
- **NEW** Guest Access or answering machine can be switched on and off at the touch of a button on the FRITZ!DECT 440
- **NEW** Roller shutter control via FRITZ!DECT 440, FRITZ!Fon, and the FRITZ!Box user interface
- **NEW** At the touch of a button on FRITZ!DECT 440 or 400, an internal phone rings and displays a message

# Further Improvements of FRITZ!OS 7.25

## Internet:
- **Improved** Assignment to devices added to the access profile settings in the parental controls
- **Improved** Device status (active/not active) is displayed in the selection of devices for port sharing
- **Improved** Clearer display of port sharing overview on mobile devices
- **Improved** Independent port sharing settings for a device are now permitted when the request was made over IPv6 for the IPv4 address of the device - and vice versa
- **Improved** Event message when port 80 temporarily released for sharing in order to issue certificate for letsencrypt.org
- **Improved** DNS over TLS (DoT) more robust
- **Fixed** In certain scenarios, IP client operating mode could not be configured correctly via LAN with DHCP
- **Fixed** Formatting errors occured in the configuration of IPv6 routes
- **Fixed** Display corrected in the port sharing overview
- **Fixed** After activating DNS over TLS (DoT) and longer run times, certain websites could no longer be resolved
- **Fixed** After update of FRITZ!OS 7.03 or older, the IP address was not refreshed on MyFRITZ!Net (DynDNS)
- **Fixed** Repeated dropping and reestablishment of VPN connections after automatic disconnection
- **Fixed** IPv6: After the home network prefix was refreshed, invalid IPv6 addresses for guest access were not deleted
- **Fixed** Changes to access profiles were sometimes rejected groundlessly with the error message "The list of blocked network applications with this ID already exists."
- **Fixed** "PTR" type DNS queries were not always resolved correctly
- **Fixed** IPv6: In IPv6 route advertisement (RA) with option 25 (Recursive DNS Server), sometimes bits from the "Reserved" field were set
- **Fixed** After restoring factory settings, the first VPN connection configured no longer worked
- **Fixed** After importing a configuration with an alternative LAN IPv4 network, the local DNS server remained in the old network after settings were adopted
- **Fixed** The TR-064 parameter WANAccess was sometimes incorrect ("granted") when no WAN was available upon restart
- **Fixed** "PTR" type DNS resolutions were not always possible
- **Fixed** Sending of advanced support data did not trigger a push mail
- **Fixed** When a saved configuration was adopted selectively, not all of the push mails originally configured were adopted
- **Fixed** VPN connections via L2TP (e.g. in Windows 10) were unexpectedly slow
- **Fixed** Device block had no effect in certain scenarios
- **Fixed** When a FRITZ!Box was operated behind certain cable modems, brief interruptions of the internet connection occurred every 12 hours
- **Fixed** In factory settings the first VPN connection could not be enabled for a single instance
- **Fixed** Expanded failover protection with mobile dongles in modem mode did not work when using a non-functioning ADSL line
- **Fixed** Expanded failover protection with mobile dongles and internet access via WAN/LAN 1 was not started under certain initial conditions present at the time of activation
- **Fixed** Online Monitor for mobile communications did not always show data when "Advanced failover protection" was enabled

## DSL:
- **Improved** Better stability and interoperability
- **Improved** Better interoperability with Long Reach VDSL
- **Improved** Improved supervectoring 35b on some remote sites

## Wireless:
- **Improved** Reworked "Wi-Fi / Wi-Fi Channel" page
- **Improved** Improved auto channel function after detection of interference sources (5-GHz band)
- **Improved** Improved messages on Wi-Fi under "System / Event Log"
- **Improved** Detection of multiple parallel WPS activations improved
- **Improved** New message under "System / Event Log" when the maximum number of wireless repeaters is exceeded
- **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language
- **Change** In "Mesh Repeater" operating mode, only Wi-Fi networks with visible names are shown for selection of the Mesh Master
- **Fixed** Erroneous display of bandwidth in connections with HUAWEI P30 corrected
- **Fixed** After radar detection with reduced power mode (Green AP), initialization problems occurred in combination with 160 MHz bandwidth (VHT160)
- **Fixed** After a FRITZ!OS update, the "Wi-Fi / Wi-Fi Channel" page did not show any Wi-Fi channels, and in some circumstances, no Wi-Fi networks in the environment
- **Fixed** Activation of WPS immediately after the Mesh Master was started frequently led to non-DBDC uplinks to Mesh Repeaters
- **Fixed** Incorrect message under "System / Event Log" for WPS during DFS wait time

## Mesh:
- **Improved** Improved indications about adoption of settings enabled for a FRITZ!Box as Mesh Repeater
- **Fixed** Incorrect formatting in the mobile view of the "Mesh Settings" page on a FRITZ!Box in "Mesh Repeater" mode
- **Fixed** Settings for Wi-Fi schedule could not be changed under some circumstances, if the setting "FRITZ!Box as a Mesh Repeater" was used
- **Fixed** For a FRITZ!Box configured as Mesh Master, but not as router (DHCP server), name and IP address of the router could not be changed
- **Fixed** Display of Wi-Fi channel bandwidth in the user interface on the Mesh Master was sometimes different on the Mesh Repeater

## Smarthome:
- **Improved** Smart Home: Improved - Template for fast changes to color settings and brightness on FRITZ!DECT 500

## Telephony:
- **Improved** Completely reworked settings pages for call diversion and call blocks
- **Improved** First Configuration wizard offers configuration of a telephone
- **Improved** Call diversions offer option to divert selected calls to a certain telephone on the FRITZ!Box
- **Improved** Setting for using internal fax machine added to "Send faxes only"
- **Improved** The "Email" and "RSS" tabs are hidden in the "Telephony / Telephony Devices" menu when DECT is switched off
- **Improved** Display and management of entries in telephone books completely reworked (among others, photo visible in overview, columns can be selected for display, and selection of multiple entries added as well as copying and moving entries between telephone books)
- **Improved** Settings for sending and receiving faxes combined under "Telephony / Telephony Devices"
- **Improved** After all new received fax documents in the fax log have been opened, the "Info" LED stops flashing
- **Improved** Integration of multiple CardDAV telephone books supported
- **Improved** Better compatibility of the FRITZ!Box's SIP registrar to the SIP client LinPhone
- **Improved** Better compatibility to telephone providers Easybell and VoIPfoneUK
- **Improved** Enhanced compatibility for encrypted telephony
- **Improved** For country setting "Germany" and telephone number configured automatically by provider, the area code included in the number is detected automatically and adopted in the line settings
- **Improved** Voice quality better for telephone calls in mobile networks and for international calls
- **Improved** Forwarding of calls accepted on Snom IP telephones supported without query
- **Improved** Stability
- **Change** Adjustment to the changed behavior of the T-Net-Box when calls are rejected, for instance due to call blocks
- **Fixed** Web address of the CardDAV server could not be changed in online telephone books after entry
- **Fixed** On a FRITZ!Box used as a Mesh Repeater for telephony, it was possible to edit the telephony numbers adopted from the Mesh Master and also to create new telephony numbers
- **Fixed** Telekom SIP trunking account could not be disabled
- **Fixed** In integrated iCloud contacts (Apple), first and last names were sometimes displayed in inconsistent order
- **Fixed** During synchronization of entries in online contacts (CardDAV), in certain constellations all email addresses were deleted
- **Fixed** Certain telephone numbers were temporarily not registered (among them Sipgate, EnviaTel, Teledate)
- **Fixed** Connections dropped after about 30 seconds for telephony connections secured by TLSonly (among others, KPN)
- **Fixed** In certain constellations, only one-way voice transmission was possible during telephony via IPv6
- **Fixed** Unsuitable presettings for telephony provider Vodafone Italy
- **Fixed** Registration of telephone numbers was not possible with telephony profile for provider Vodafone Italia
- **Fixed** Sporadic errors when faxing via T.38 connections
- **Fixed** No hold announcement after resetting to factory settings
- **Fixed** Pickup on IP telephones was possible for no longer than 4 seconds
- **Fixed** After a fax was sent, the name of a recipient selected via the telephone book was not displayed in the call list
- **Fixed** Editing of door intercom stations sometimes led to loss of email notification for door intercom stations
- **Fixed** After importing answering machine settings including saved messages into another FRITZ!Box model, sometimes the imported messages could no longer be played back
- **Fixed** Ring sequences incorrect for the country setting "Australia"
- **Fixed** Sporadic loss of schedule settings for the answering machine after updating FRITZ!OS

## Home Network:
- **Improved** Faster display of network connections in very large networks
- **Improved** When leaving the device details a message concerning changed device names is displayed only if the name was actually changed
- **Change** When an individual name is set for the FRITZ!Box, the name of the working group for home network sharing ("USB/Storage") remains unchanged
- **Fixed** The section for blocking devices was displayed in the device details of guest devices even though this function is reserved for home network devices
- **Fixed** Changed IP settings of the FRITZ!Box were not offered for printing
- **Fixed** Time synchronization (NTP) was instable in certain scenarios

## USB:
- **Improved** In fritz.nas, multiple files can be selected using the shift key
- **Fixed** Home network sharing of a network drive (SMB) was not visible under Network in Windows Explorer
- **Fixed** Data transmission via network drive function (SMB) failed with the Windows error message "STATUS_NO_MEMORY"
- **Fixed** Online storage was not always reconnected after automatic DSL disconnection

## System:
- **Improved** Configuration wizard can be interrupted and resumed
- **Improved** Various usability improvements in the First Configuration wizard
- **Improved** Status overview page within the first configuration
- **Improved** Security query when leaving a page without saving changed settings
- **Improved** Saving and restoring settings now includes telephony data from the internal storage of the FRITZ!Box (ring tones, telephone book pictures, voice messages)
- **Improved** After support data have been sent to AVM, a second dispatch can be started immediately without any wait time
- **Improved** A password can be made visible during entry (eye icon) in the user interface
- **Improved** Corrected details in the "Diagnostics / Function" for Mesh and USB
- **Change** Offer to switch to "Level III: Notify me about new versions of FRITZ!OS and install new versions automatically (recommended)" is now offered after updating only when "Level II: Notify me about new versions of FRITZ!OS and install necessary updates automatically" was previously configured
- **Change** The option to log in to a FRITZ!Box (user interface) without a password, which was not recommended, is no longer supported *1
- **Change** If "only with the FRITZ!Box password" was set up for logging in to the user interface, a FRITZ!Box user with the name "fritz" and a random four-digit number together with the FRITZ!Box password will be created automatically. To log in to the user interface in the home network, entering the FRITZ!Box password is still sufficient. *2
- **Fixed** FRITZ!Box users could not be sorted in the overview
- **Fixed** Access profiles with blocked applications in parental controls were not available when settings were restored
- **Fixed** Number of messages in "System / Event Log" was too restricted in some areas
- **Fixed** Display of installation date for the last update was incorrect in certain scenarios

## Mobile Communications:
- **Improved** New "Compatibility mode for mobile broadband dongles" option for generic integration of variants of known mobile broadband dongles
- **Improved** Country-specific list of mobile network providers when FRITZ!Box used with a USB mobile network dongle
- **Improved** Optimized details for "Advanced failover protection" setting
- **Improved** Mobile network provider "Magenta Mobil" added for Austria
- **Improved** Support for Huawei E3372h-320 USB mobile network dongle

*1. The home network login mode without a password, which is not recommended, is no longer supported. For the initial access to the user interface after the FRITZ!OS update, the user needs to assign a FRITZ!Box password (additional confirmation required)

*2. Automatic generation of a user according to the naming structure fritz and a random four-digit number if login before the update took place only with the FRITZ!Box password. Important information for developers of apps that would like to register with FRITZ!Box can be found at avm.de/service/schnittstellen
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par Eric » 25 Juil 2021 13:26

J'ai upgradé en 7.28 (j'étais en 7.13).
Il me m'a posé aucune question et je me suis retrouvé en 1.180.131.76
Mais je n'ai pas de fallback ????
Faut-il déjà réinstaller la 7.13 pour éviter un fallback plus tard ?
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par Eric » 25 Juil 2021 13:33

Déjà fait 2 déconnexion + speedtest et tout reste au max. (98Mbits/sec en download)
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par kalima » 26 Juil 2021 12:56

Bonjour Eric,

Tu es toujours avec le 7.28 et le DSL Driver 1.180.131.76 activé ?

Sans fallback ?
Proximus Internet Maxi (VDSL2 : 100mbps/30mbps@166m) // Fritz!Box 7590-7.55 (DSL Driver Native) // 2XAsus RT-AX86U(1xMain/1XAiMesh) Asus-Merlin388.2.2 // Shield 2019Pro + Kodi V21 Alpha for DV
kalima
Membre
Membre
 
Message(s) : 105
Inscription : 04 Oct 2019 11:44

Re: FritzBox 7590

Message par Eric » 26 Juil 2021 17:24

Oui toujours avec l 7.28 avec 1.180.131.76
Je viens encore de faire une déco/Reco et un speedtest et tout est encore impeccable.
tout est prévu pour réinstaller la 7.13 en cas de rollback.
Mais ce que je ne comprends pas, c'est que jamais j'ai eu la possibilité de choisir de garder l'ancien driver DSL.

Tiens, toi ton driver DSL cela n'a pas l'air d'être celui de la 7.13 ?
Avatar de l’utilisateur
Eric
Casimir Team
Casimir Team
 
Message(s) : 4854
Inscription : 11 Juin 2001 01:00
Localisation : Jodoigne

Re: FritzBox 7590

Message par csam » 26 Juil 2021 20:08

Eric a écrit :Oui toujours avec l 7.28 avec 1.180.131.76
Je viens encore de faire une déco/Reco et un speedtest et tout est encore impeccable.
tout est prévu pour réinstaller la 7.13 en cas de rollback.
Mais ce que je ne comprends pas, c'est que jamais j'ai eu la possibilité de choisir de garder l'ancien driver DSL.

Tiens, toi ton driver DSL cela n'a pas l'air d'être celui de la 7.13 ?

Si tu as fais un upgrade, il faut aller dans informations DSL->paramètres de la ligne->cocher sous version DSL "utiliser la version DSL précédente.

Moi avec une 7530 je tourne en 7.27 et version dsl précédente activée. Pas encore de 7.28 pour la 7530.
___
CS
Avatar de l’utilisateur
csam
Acharné
Acharné
 
Message(s) : 3515
Inscription : 05 Fév 2016 23:38
Localisation : Arel land

Re: FritzBox 7590

Message par kalima » 27 Juil 2021 06:51

Eric a écrit :Oui toujours avec l 7.28 avec 1.180.131.76
Je viens encore de faire une déco/Reco et un speedtest et tout est encore impeccable.
tout est prévu pour réinstaller la 7.13 en cas de rollback.
Mais ce que je ne comprends pas, c'est que jamais j'ai eu la possibilité de choisir de garder l'ancien driver DSL.

Tiens, toi ton driver DSL cela n'a pas l'air d'être celui de la 7.13 ?


Oui le 7.13 et 7.21 ont le même DSL Driver , je vais surement sauter le pas aussi pour faire le test. Je vous tiens informé :)

Edit 1 : Mise à jour effectuée , j'ai bien la synchro habituelle pour l'instant.
Edit 2 : Toujours la synchro aprés 24h :leffe: :) , on peut dire que le DSL Driver 1.180.131.76 est surement en cours de validation chez proximus. (dans mon cas le ROP est un Nokia)
Proximus Internet Maxi (VDSL2 : 100mbps/30mbps@166m) // Fritz!Box 7590-7.55 (DSL Driver Native) // 2XAsus RT-AX86U(1xMain/1XAiMesh) Asus-Merlin388.2.2 // Shield 2019Pro + Kodi V21 Alpha for DV
kalima
Membre
Membre
 
Message(s) : 105
Inscription : 04 Oct 2019 11:44

Re: FritzBox 7590

Message par ouffti » 28 Juil 2021 15:55

Bonjour,
Une connaissance ma offert une fritzbox 7590
Comment réinstaller la 7.13 , je suis chez EDPNET depuis quelque jours et il recommande cette version.

Merci
ouffti
Membre
Membre
 
Message(s) : 48
Inscription : 24 Nov 2010 10:18

PrécédentSuivant

Retour vers Routeur/Adsl

Qui est en ligne ?

Utilisateur(s) parcourant ce forum : Aucun utilisateur inscrit